Rotary screen printing Flat screen printing line for electronic devises ＊Stabilized continuous (constant speed) screen printing ＊Pattern printing ＊High speed printing ( Mechanically operated 150m/min) ＊Area thick coating ＊Adhesive pattern coating ＊Organic EL ＊RFID antenna, circuit printing ＊For shield, scratch card ＊Battery electrode coating ; Lithium Ion battery, fuel cell ＊Dot coating Please contact us in case you want to try test printing or need printed samples. Rotary screen print unit Rotary screen printing/coating line Go to page top High positioning accuracy printing 　* Roll to roll 　* Roll to sheet unload Example of production line specification (1)　Capability (Cycle time) ---　2.5sec/print (2)　Film feed speed ---　2〜10m/min (Calculated into specified length feed) Maximum speed of the suction roll itself (40m/min) (3)　Vacuum source ---　Dry vacuum pump method (4)　Feed length/print ---　150mm〜270mm (5)　Positioning time ---　1.0sec〜 (6)　Positioning accuracy ---　X axis direction ±0.05mm (control set value) ---　Y axis direction ±0.05mm(EPC control range) (7)　Film width ---　200mm〜300mm (8)　Film roll outer diameter ---　Φ90〜Φ550mm (9)　Maximum film roll weight ---　100kg (10)　Film material ---　PET film　　25〜100μm (thickness) Illustration example of the production line： Configuration example: Tension controlled unwound film at unwind section is fed by specified length by radial feed roller, then printed by screen print unit, passed through drier and tension control rewound by rewind section. Go to page top Copyright (C) Wintech All Rights Reserved.